UNIVERSAL

Overview

Machine tool that, using 2D data, carves or cuts think wood materials or acryl sheets with a laser. Can process acryl (up to 5mm), wooden materials (up to 5mm), paper, felt (synthetic fibers), rubber, leather, etc. Not to be used on food.

Specs

Creating data

  • Set color mode to “RGB Mode”
  • Create 1 art board
  • It is possible to split data into layers
  • Marking　→ Black (R:0, G:0, B:0) fill in, no lines
  • Cutting　… Red (R:255, G:0, B:0)　Line width 0.01mm, no fill in
  • Engraving 　… Blue (R:0, G:0, B:255)　Line width 0.01mm, no fill in
  • Save version for Illustrator go up to CS3

Operating instructions for UNIVERSAL

Operating instructions for UNIVERSAL

Maintenance

  • When the dust collector exceeds “4” on the scale, exchange the tissue
  • After machining, clean the mirror, lens, and dust collector
  • Remove any garbage underneath the honeycomb table after machining
  • Whenever there is anything burned or stuck underneath the table, use the Magiclean, then wipe with a damp cloth, and wipe with a dry cloth

Reminders when machining

  • Confirm process settings
  • Be aware that there are times when you will be able to temporarily stop, and times where you won’t